彼得曼32.768K有源晶振的優勢，Time requirements in modern metering applications have massively increased in the last few years. The usual requirement in modern metering applications is a time offset of 1 hour after 7 years. It should also be possible for the operating temperature range of the application to comply with this value. 1 hour max. after 7 years corresponds to a frequency tolerance of ±16 ppm absolute at 32,768 kHz. It is no longer possible for conventional 32,768 kHz oscillating crystals to meet these requirements.

On the one hand, this is because 32,768 kHz are only available with a frequency tolerance of ±10ppm at +25°C, on the other hand, the temperature stability over a temperature range of -40/+85°C is more then -180 ppm. Moreover, ageing of approx. ±30 ppm after 10 years must be taken into account when calculating accuracy. In the worst case, a 32,768 kHz crystal has a maximum frequency stability of +40/-220 ppm (including adjustment at +25°C, temperature stability and ageing after 10 years). External circuit capacitance must be able to compensate any systematic frequency offset caused by the internal capacitance of the oscillator stage of the IC to be synchronised and by stray capacitance. The selection of a layout without external circuit capacitance for the 32,768 crystal involves a great risk because the accuracy of the 32,768 crystal can neither be corrected nor adjusted to suddenly changing PCB conditions during series production. Initially, the intersection angle for the 32,768 crystal was designed for optimal accuracy in wristwatches, and not for most of the applications for which it is used nowadays.

In order to meet the highly accurate time requirements, we as a clocking specialist offer the series ULPPO ultra low power 32,768 kHz oscillator. This oscillator can be operated with each voltage within a VDD range of 1.5 to 3.63 VDC. The specified current consumption is 0.99 µA. The temperature stability of ULPPOs is ±5 ppm over a temperature range of -40/+85°C. Frequency stability (delivery accuracy plus temperature stability) is ±10 ppm, and ageing after 20 years is ±2 ppm. Thus the maximum overall stability of ULPPOs is ±12 ppm including the ageing after 10 years. These are industry best parameters.

No external circuit capacitance is required for the circuiting of the ultra small housing (housing area: 1.2 mm2). The input stage of the IC installed in the ULPPO independently filters the supply voltage. Compared to crystals, ULPPOs save a lot of space on the printed circuit board so that the packing density can be increased, and smaller printed circuit boards can be designed. The adjustment of the amplitude further reduces the power consumption of the ULPPO.

For space calculations, both external circuit capacitances for a crystal on the printed circuit board must also be taken into account. With its two external circuit capacitances, even the smallest 32,768 kHz crystal requires more space on the PCB than ULPPOs do.

Moreover, very small 32,768 kHz crystals have very high resistances which usually cannot be safely overcome by the oscillator stages to be synchronised because the oscillator stages of the ICs or RTCs to be synchronised have very high tolerances as well. Therefore, sudden response time problems in the field might occur which can be ruled out with ULPPOs. Thus, the safe operation of the application is possible with ULPPOs under all circumstances.

Oscillator stages consume a lot of energy to keep a 32,768 crystal oscillating. Usually, the input stage of the MCU can be directly circuited with the LVCMOS signal of the ULPPO (usually Xin). Thus the input stage of the MCU can be deactivated (bypass function) so that the energy saved can be used for the calculation of the system power consumption of the meter. Moreover, ULPPOs are able to synchronise several ICs at a time. Due to the very high accuracy of the ULPPO, less time synchronisations are required, which also saves system power.

Of course, ULPPOs can be used in any applications which require miniaturised ultra low power 32,768 kHz oscillators such as smartphones, tablets, GPS, fitness watches, health and wellness applications, wireless keyboards, timing systems, timing applications, wearables, IoT, home automation, etc. Due to the high degree of accuracy of 32,768 kHz oscillators, the standby time or even the hypernation time in hypernation technology applications can be significantly increased so that a high amount of system power can be saved due to the significantly lower battery-intensive synchronisation cycles. Thus the 32,768 kHz oscillator is the better choice compared to 32,768 kHz crystals. Ultra low power 32,768 kHz oscillators are available with diverse accuracy variations – see also the ULPO-RB1 and -RB2 series.

不斷精進自我的優質制造商彼得曼公司，致力于開發大量高質量的產品，隨著近幾年來，現代計量應用的時間要求大幅提高?，F(xiàn)代計量應用的通常要求是7年后時間偏移1小時。應用的工作溫度范圍也應符合該值。最多1小時。7年后對應于32，768kHz下16ppm絕對值的頻率容差。傳統的32，768 kHz振蕩晶體不再可能滿足這些要求。彼得曼32.768K有源晶振的優勢.

一方面，這是因為32，768kHz僅在+25°C時具有10ppm的頻率容差，另一方面，在-40/+85°C溫度范圍內的溫度穩定性高于-180ppm。此外，老化約。計算精度時，必須考慮10年后的30ppm。最差情況下，ref="/32768Kcrystals.html" title="32.768K有源晶振" target="_blank">32.768K有源晶振的最大頻率穩定性為+40/-220 ppm(包括+25°C時的調整、溫度穩定性和10年后的老化)。外部電路電容必須能夠補償由要同步的ic振蕩器級的內部電容和雜散電容引起的任何系統頻率偏移。為32，768晶振選擇無外部電路電容的布局包含很大的風險，因為在批量生產期間，32，768晶振的精度既不能校正也不能調整以適應突然變化的PCB條件。最初，32，768英寸晶體的交叉角度是為手表的最佳精度而設計的，而不是為如今使用它的大多數應用而設計的。

彼得曼貼片石英晶振專用于超聲波,公司

PETERMANN-TECHNIK是象征著質量和可持續性。這是一家有著偉大使命的知名制造商,從打磨產品的每一個細節之中可體現，你從一個來源得到一切。從合格的設計服務到我們的內部工程，再到具有卓越一致質量和性能的最高質量產品。

30多年來，我們在頻率控制元件和系統方面積累了豐富的專業知識。我們的經驗不僅限于使用ref="/Quartzcrystal.html" title="石英晶振" target="_blank">石英晶振和振蕩器開發電路。它還包括深入的工程知識，這是我們咨詢服務和頻率確定元件銷售的基礎。你可以相信我們的經驗和專業知識。因為我們的目標是能夠通過及時和有能力的咨詢?yōu)槟峁┳詈玫闹С帧?/span>

代表團

彼得曼技術公司努力為每一種產品和服務提供最高的質量、安全性、靈活性和客戶滿意度。作為一個充滿活力的市場環境中的創新者，我們致力于成為客戶可靠的戰略合作伙伴。憑借我們廣泛的產品和服務、不折不扣的質量和卓越的性價比，我們支持他們開發具有競爭力的高效應用。

r />

每個開發和生產專家都知道！石英晶體不能處理超聲波焊接和清洗。高頻焊接或清洗過程會損壞ref="/Quartzcrystal.html" title="石英晶體諧振器" target="_blank">石英晶體諧振器。

VCXO壓控晶振X1G005361001200適用于航空設備應用

愛普生晶振MC-146是一款ref="/32768Kcrystals.html" title="32.768k晶振" target="_blank">32.768K晶振，小體積尺寸7.0x1.5mm無源晶振，石英晶體諧振器，四腳貼片晶振，工作溫度-40℃至+85℃，具有小體積輕薄型，耐熱及耐環境特性，特別適用于鐘表電子，智能手機，儀器儀表，平板電腦，智能電表，智能門鎖，汽車電子等。

智能手機高精度32.768K晶振Q14MC1462002600

日本愛普生晶振TG2520SMN，為了更好的滿足高端智能產品需求，提供ref="/TCXOcrystal.html" title="溫補晶體振蕩器" target="_blank">溫補晶體振蕩器系列以及壓控溫補晶振系列兩種。小體積晶振尺寸2.5x2.0x0.8mm四腳貼片晶振，頻率范圍:10MHZ至55MHZ之間，并且具有1.8V Typ./2.8V Typ./3.0V Typ./3.3V Typ等多種電源電壓。滿足市場需求提供±2.0PPM,±0.5PPM高精度。工作溫度范圍:-40℃至+85℃，TG2520SMNref="/SMDcrystal.html" title="貼片晶振" target="_blank">貼片晶振具有超小型，輕薄型，低電源電壓，低抖動，低功耗，低損耗，低耗能，低電平，高精度，耐高溫等特點。被廣泛用于5G移動通訊設備，GPS定位器，工業控制，消費電子，智能安防，物聯網，車載電子，工業機械等領域。

GPS定位器專用晶振TG2520SMN溫補晶體振蕩器X1G005421021327

日本愛普生晶振SG-9101CA是具有CMOS輸出的ref="/SiTimeCrystal.html" title="可編程晶振" target="_blank">可編程晶振系列，小體積尺寸7.0x5.0mm四腳貼片晶振，有源晶振，晶體振蕩器，電源電壓:1.62V至3.63V，頻率范圍:0.67MHz至170MHz，SG-9101系列ref="/" title="石英晶體振蕩器" target="_blank">石英晶體振蕩器還提供以下流行的封裝超小型晶振尺寸:2.5x2.0mm，3.2x2.5mm和5.0x3.2mm封裝使電子制造商能夠節省電路板空間。具有小體積輕薄型，低功耗，低抖動，高性能，高品質等特點，應用于鐘表、數碼產品、汽車電子、手機、對講機、數碼相機、MID平板電腦，光電技術等通訊設備及各種頻率控制設備。

SG-9101CA可編程晶振X1G005301001500可以滿足任何頻點的晶體振蕩器

日本愛普生晶振FC1610AN是一款ref="/32768Kcrystals.html" title="32.768k晶振" target="_blank">32.768k晶振，超小型尺寸1.6x1.0mm兩腳貼片晶振，無源晶振，工作溫度-40℃至+85℃，ref="/Quartzcrystal.html" title="石英晶體諧振器" target="_blank">石英晶體諧振器，具有超小型，輕薄型，耐熱及耐環境特性。特別適用于小型便捷式設備，可穿戴設備，智能手環，手表，鐘表電子用，水電表，儀器儀表，平板電腦等。

FC1610AN貼片晶振X1A000161000100特別適用于智能手表應用